40M/130FT Underwater camera housing for Sony A1 + Optical acrylic 6" Dome port V.1 only (Standard or Flat port not included).
Full camera control is available, except for the joystick, as well as aperture control wheel not working when using with the Dome Port V.1
SeaFrogs 6" Dry Dome Port V.1
6" Optical Acrylic Dry Dome Port V.1 with a lens shade. Created specifically for underwater photography.
The primary application of this underwater housing is underwater photography/videography. However, it can do a lot more by protecting your camera from weather hazards such as rain, dust, snow, etc. Because of its compact size and nearly all functionality, it is an ideal item to have while traveling.
Compatible lenses (Dome port)
Sony FE 20mm F1.8G (No manual focus available)
Sony FE 14mm F1.8 GM (No manual focus available)
Sony FE 28mm F2 (No manual focus available)
- ABS plastic
- Stainless steel
- EPDM rubber
- O'ring sealed buttons with spring
- Optical acrylic
- Vacuum Pump System port
- Inbuilt leak detection sensor
- Interchangeable port system
- Synchro cable port
- Fiber optic port
- 6" Dry dome port V.1 (Optical acrylic)
- Stainless steel mounting plate 1/4" Thread
- 40m / 130ft Dept rate
- Reinforced metallic bottom plate
In order to connect an external strobe with this housing, it will require to use a Dual 5-Pin Sync Cord (purchase here) or a Single 5-Pin Sync Cord (purchase here), or Fiber-optic cable.
- Underwater housing for Sony A1
- 6" Dry dome port V.1
- User manual
- Spare O'ring (150x4mm, back)
- Silicone grease 5ml packet
- Shoulder & wrist strap